2-1/2 Inch 15 Gauge Angled Finish Nailer with Air Duster | Metabo HPT NT65MA4
Model# NT65MA4
- AWARD: Rated the Pro Preferred Nailer for 9 years running (2014 - 2022) by Builder and Developer Magazine
- FASTENERS: 15-gauge nails from 1-1/4-in Up to 2-1/2-in In length
- APPLICATIONS: Ideal for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases
- NO-MAR TIP: Protects the work surface from damage and can be removed if not needed
- AWARD: Rated the Pro Preferred Nailer for 9 years running (2014 - 2022) by Builder and Developer Magazine
- FASTENERS: 15-gauge nails from 1-1/4-in Up to 2-1/2-in In length
- APPLICATIONS: Ideal for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases
- NO-MAR TIP: Protects the work surface from damage and can be removed if not needed
Features
LIGHTWEIGHT
At only 4.2 lbs and well balanced for easy maneuverability and less fatigue in extended use
FASTENERS
Accepts 15-Gauge angled nails ranging in length from 1-1/4" up to 2-1/2"
SELECTIVE ACTUATION
Easily select between bump fire or contact fire modes with the simple flip of a switch
DEPTH ADJUSTMENT DIAL
Allows the user to easily adjust the drive depth for a professional finish
The 15 Gauge 2-1/2 Inch Angled Finish Nailer (NT65MA4) is the ideal finish nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases.
Its compact body and angled magazine make for easier placement and operation in tight angles. The integrated air duster on this finish nailer clears debris from the work site allowing for faster and cleaner job completion. The NT65MA4 finish nailer accepts 15-gauge nails from 1-1/4" up to 2-1/2" in length.
Features of the 15 Gauge Finish Nailer
- AWARD: Rated the Pro Preferred Nailer for 9 years running (2014 - 2022) by Builder and Developer Magazine
- FASTENERS: 15-gauge nails from 1-1/4-in Up to 2-1/2-in In length
- APPLICATIONS: Ideal for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases
- TRIGGER: Easily switch from either sequential or contact nailing with a simple flip of the switch
- DEPTH ADJUSTMENT: Tool-less depth of drive dial adjusts for flush fastening into varying materials for improved control and a professional finish
- LIGHTWEIGHT: Only 4.2 lbs, this finish nailer minimizes user fatigue, while increasing maneuverability
- EXHAUST PORT: 360-Degree fully adjustable exhaust port directs air exhaust away from the user or work piece
- AIR DUSTER: Ideal for clearing away dust and debris from the work surface
- MAGAZINE: Angled magazine making for easier placement and operation in tight angles
- NO-MAR TIP: Protects the work surface from damage and can be removed if not needed
- RECOMMENDED: Use Metabo HPT Nails for best results
- WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty
- COMPLIANT: Safety standards for pneumatic nailers in the United States
- TOOL CARD: Download the NT65MA4 Tool Card
Included with the 15 Gauge Finish Nailer
- Safety Glasses (875769)
- No Mar Tip (881751)
- 1/4" NPT Male Plug (190001)
- Carrying Case (884340)
Specifications
| Weight | 4.2 lbs |
| Length | 13-9/16" |
| Height | 12" |
| Width | 3-1/4" |
| Operating Pressure | 70-120 PSI |
| Grip | Rubber |
| Nail Capacity | 100 nails |
| Magazine Type | Rear Loading |
| Nail Diameter | 15-Gauge |
| Nail Lengths | 1-1/4" - 2-1/2" |
| Magazine Angle | 34 Degrees |
Includes
- 15 Gauge Finish Nailer
- Safety Glasses (875769)
- No Mar Tip (881751)
- 1/4" NPT Male Plug (190001)
- Carrying Case (884340)