1-1/2 Inch 18 Gauge Cap Stapler | Metabo HPT N3808AP

Model# N3808AP

  • FASTENERS: 7/16-in crown 18 gauge staples of 7/8-in, 1-1/4-in, and 1-1/2in lengths
  • APPLICATIONS: Ideal cap stapler for roofing felt, foam insulation, and house wrap
  • LIGHTWEIGHT: Only 4.8 lbs with an ergonomic design enables long periods of continuous use

  • FASTENERS: 7/16-in crown 18 gauge staples of 7/8-in, 1-1/4-in, and 1-1/2in lengths
  • APPLICATIONS: Ideal cap stapler for roofing felt, foam insulation, and house wrap
  • LIGHTWEIGHT: Only 4.8 lbs with an ergonomic design enables long periods of continuous use

Features

FASTENERS

Accepts 7/16-in crown 18 gauge staples of 7/8-in, 1-1/4-in, and 1-1/2in lengths

CAPACITY

Basket holds 200 caps and the magazine holds 200 staples

DEPTH ADJUSTMENT

Tool-less depth of drive adjustment for optimal fastener depth to accommodate a variety of applications

LIGHTWEIGHT

Only 4.8 lbs with an ergonomic design enables long periods of continuous use

The 1-1/2 Inch 18 Gauge Cap Stapler (N3808AP) brings power, precision, and convenience to the home-wrap and roof-felt industry. With a weight of only 4.8 lbs, and accepting 200 staples and caps in the magazines, this tool provides maximum jobsite efficiency. It drives 18-Gauge 7/16" crown staples through 1" diameter caps to provide maximum hold and support.

Exceptional balance, tool-less depth of drive and 360° adjustable exhaust make this cap stapler ideal for housewrap, insulation, tar paper, synthetic roofing underlayment and other similar applications. The Cap Stapler comes standard with a sequential trigger installed on the tool and an optional contact (bump) trigger in the box.

 

Features of the Cap Stapler
  • FASTENERS: 7/16-in crown 18 gauge staples of 7/8-in, 1-1/4-in, and 1-1/2in lengths
  • APPLICATIONS: Ideal cap stapler for roofing felt, foam insulation, and house wrap
  • LIGHTWEIGHT: Only 4.8 lbs with an ergonomic design enables long periods of continuous use
  • CAPACITY: Basket holds 200 caps and magazine holds 200 staples
  • PERFORMANCE: Provide superior hold and shear values than common 3/8 In. systems
  • TRIGGER: Two triggers, red for sequential firing and black for bump firing
  • DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for optimal fastener depth to accommodate a variety of applications
  • AIR DEFLECTOR: 360 degree adjustable air deflector directs the air exhaust in any direction
  • MAGAZINE: Translucent side-load cap magazine to easily identify remaining cap quantity
  • RECOMMENDED: Use Metabo HPT Staples for best results 
  • TOOL CARD: Download the N3808AP Tool Card


Staples & Plastic Caps

   Available Staples:

  • 7/8" x 7/16" x 18GA 2M (31102S)
  • 1-1/4" x 7/16" x 18GA 2M (31105S)
  • 1-1/2" x 7/16" x 18GA 2M (31107S)

Included with the Cap Stapler:
  • Safety Glasses (875769)
  • Contact (Bump Trigger)

Specifications

Staple Length 7/8" - 1-1/2"     
Staple Capacity 200
Cap Diameter 1"
Cap Capacity 200
Fastener Cap Type        Plastic
Depth Adjustment Tool-less
Adjustable Exhaust Yes
Actual Weight 4.8 lbs
Tool Length 14-1/8"
Tool Height 8-7/8"
Operating Pressure 70-120 psi
Warranty 5-Year














Includes

  • Safety Glasses (875769)
  • Contact (Bump Trigger)