GO Longer with these 2 NEW TOOLS + 2 NAILER Accessories from Metabo HPT

GO Longer with these 2 NEW TOOLS + 2 NAILER Accessories from Metabo HPT

We are happy to share the launch of new Metabo HPT tools and accessories, the 36V MultiVolt™ 1/2" "High Power" Right Angle Drill, the 1-9/16" SDS Max Rotary Hammer plus the 21 degree and 30 degree extended magazines for cordless framing nailers.

The Metabo HPT 36V MultiVolt™ 1/2" "High Power" Right Angle Drill Kit (D36DYA) and bare tool (D36DYAQ4) allow the end-user to get into tight out of the way spaces, anywhere that may be difficult to reach with a regular drill. For end-user comfort, the tool has a high center of gravity, 2-finger trigger design, is compact and light weight. It also has safety features like the mechanical slip clutch, anti-kickback and reactive force control (RFC). RFC stops the motor if the tool bit suddenly binds or if tool overload is detected, keeping the user safe during operation.

 The 36V MultiVolt™ platform offers dual power source technology, eliminating the need to have both a cordless and corded tool. MultiVolt gives the option to operate all 36V MultiVolt tools either with a MultiVolt 18V/36V battery or MultiVolt AC Adapter with cord. Easily connect the AC adapter (ET36A) to the tool and keep working while the battery charges. GO longer with the MultiVolt™ platform solution!

Some key features for the D36DYA:

Brushless motor
LED light
1,500 Max RPM
6-1/4” Hole saw capacity
110 Holes per charge* (in wood with 36V 4.0 Ah battery)

The high performance Metabo HPT 1-9/16" SDS Max Rotary Hammer (DH40MEY2) includes an AC brushless motor that improves the tools life and allows for the use of longer extension cords and gas-powered generators. The rotary hammer includes continuous run mode, this allows the user to keep the tool running with the flip of a switch, reducing user fatigue. This tool also has many safety features like user vibration protection (UVP) and reactive force control (RFC). Its newly redesigned dynamic vibration absorber and low vibration handle offer 13% less vibration than the previous model (DH40MEY). The rotary hammer is also equipped with a mechanical slip clutch for an added layer of protection. These tools features form the perfect combination of performance, safety, and comfort!

Some key features for the DH40MEY2:

4-Speed modes
8.6 Ft-lbs. impact energy
2,800 BPMs
500 No-load speed
2 modes: hammer and hammer drill
One-push bit mounting
 



The Metabo HPT Extended Magazine for 21° Full Round Head for Cordless Framing Nailer (379048M). This magazine is compatible with Metabo HPT 21 degree cordless framing nailers, 18V and 36V. It accepts round head 21 degree plastic strip nails from 2” up to 3-1/2 in length and .113” to .131” in diameter. The magazine also accepts 2 strips of plastic collated 21 degree nails.


Compatible framing nailers: NR1890DRSNR1890DRSQ7NR1890DRSTNR3690DR

The Metabo HPT 18" Extended Magazine for 30° Clipped Head for Cordless Framing Nailer (379046M). This magazine is compatible with Metabo HPT 30 degree cordless framing nailers, 18V and 36V. It accepts clipped head and offset round head 30 degree paper tape collated nails from 2” up to 3-1/2 in length and .113” to .131” in diameter. The magazine also accepts 2 strips of paper collated 30 degree nails.

Compatible framing nailers: NR1890DC, NR1890DCSNR1890DCSTNR1890DCSQ7NR3690DC

Related Articles

Apr 26, 2024
GO Stronger and Longer with these 10 NEW TOOL introductions from Metabo HPT and Metabo!
We are excited to present our newest launch of Metabo HPT and Metabo cordless tools and accessories. We have a total of 10 new products and 12 new order numbers to highlight, featuring a wide range of tools and accessories. This includes a brad nailer, narrow crown stapler, rotary hammer, hammer drill, impact wrench, circular saw, reciprocating saw, a vacuum, MultiVolt™ battery, and a tape measure.
Read More